Toshiba DK424, dk14, DK40I manual Program 04 Example, 3-17, System & Station, 6SNU6SHDNHU+ROG, +Rog

System & Station

Program 04 – Station Logical Port [PDN] Assignment

Program 04 Example

	Action (press buttons+LED buttons)	LCD Response
1.	Use an LCD programming phone per Minimum Hardware		No. N-N1
	Requirements in Chapter 1 - Overview.	Jan 20 Sun	06:43
2.	✱￿✱￿￿✱￿✱￿	Program Mode
	Enter programming mode. (Do not press the [DN] button.)
3.	6SNU￿￿6SHDNHU￿￿￿￿￿+ROG	Program = 04
	Access Program 04. The speaker beeps to indicate when to enter a	Data Store
	program number.
4.	6SNU￿￿6SHDNHU￿	04 Select =
	Prepare the system for a selection.
5.	￿￿￿￿a￿￿￿￿	04 Select = 000
	Select a port number (use three digits plus #).	INT = N-N
6.	;;;;	04 Select = 000 ~239
	Enter the port’s station number (up to four digits) from the record	INT = XXXX
	sheet.
Note Station numbers must not exceed four digits, or conflict with
	feature access codes listed in Program 05 record sheet.
7.	+ROG	04 Select = (000~335)		System
	Secure data in system programming.	Data Programmed
8.	6SNU￿￿6SHDNHU￿	04 Select =
	Prepare the system for another selection (go back to Step 5) or			&
	continue with Step 9.
				Station
9.	￿￿+ROG	00 Select = ##
	Secure Program 04 data in system memory.	Data Programmed
10.	6SNU￿￿6SHDNHU￿	Program =
	Exit Program 04 (system beeps). Enter another program number or
	continue with Step 11.
11.	￿￿+ROG		No. N-N
	Exit programming mode.	Jan 20 Sun	06:58

1. N-N = program telephone [PDN]

Strata DK Programming 5/00 3-17