Toshiba DK40I, dk14, DK424I manual Guidelines for Programming ISDN Calling Features

ISDN

Guidelines for Programming ISDN Calling Features

Guidelines for Programming ISDN Calling Features

The following tables provide guidelines for programming various ISDN calling features.

Programming for ISDN CO Switch Type

Determine which type of CO switch is providing the PRI service and set the following programs accordingly. (This is not necessary for Basic Rate Interface (BRI) service.) Most Northern Telecom DMS ISDN switches follow Northern Telecom’s PRI custom protocol, sometimes referred to as National ISDN Stardard 1 (NI1). However, some DMS ISDN switches are National ISDN Stardard 2 (NI2). Most all ISDN switches manufactured by other companies follow the NI2 standard.

Table 7-1 ISDN CO Switch Type Programming

Program	DMS Custom (NI1) Switch			NI2 Switches
	LED 11 Off		LED 11 On
*66-3	LED 13	On, Progress ID 81	LED 13	Off, Progress ID 83
	LED 14	On	LED 14	Off, Progress ID
	LED15 On		LED 15 Off

Programming for ISDN PRI DID Type Call

The following table shows the minimum programming needed to make DID-type ISDN PRI calls work in the Strata DK System with Release 4.15 and higher software.

Table 7-2 ISDN PRI DID Type Call Programming

Program	Program Data	Description
Number
03	XX 79	XX equals the slot in the DK system where the RPTU PCB is placed.
10-4	LED 9 On	Listed Directory Number (LDN) registration will route the unknown number or
		call type in numbering plan.
*16	XX 2	This tells the system that trunk group XX is an ISDN PRI Trunk Group.
		This tells the system to make the ISDN PRI span the primary clocking source
*42	1 XX 1	for the DK System. “XX” stands for the DK slot where the RPTU PCB is
		placed, and the final “1” refers to circuit 1.
*43-1	1 1 24	This tells the system that the D-channel on the first ISDN PRI Span is the
		24th channel on the PRI Span.
*63-2	04	This tells the system how long to wait to collect digits from station users
		making a ISDN PRI call before sending it to the network.
*64-1	LED 01 On	This tells the system to accept the incoming calls on the PRI Span as DID or
		DNIS Calls.
*64-2	X	“X” tells the system the number of digits to look for on a DID or DNIS call.
*65-1	CO LED 001-023 On	This tells the system that there are 23 bearer channels on the first Channel
		Group, and that they will appear on CO lines 001~023.
*66-1	01 1	This tells the system that Trunk Group 01 is assigned to PRI Channel
		Group 1.

7-6 Strata DK Programming 5/00