Toshiba DK424, dk14 4-39, Toll Restriction, Program Type, Initialized Default 100 for all ports

Toll Restriction

Program 48 – Station Toll Restriction Classification

Program 48 – Station Toll Restriction Classification

Processor Type: DK14, DK40i, all RCTUs and BCUs

Program Type: Toll Restriction

Initialized Default: 100 for all ports

✱ ￿ ✱￿￿ ￿ ✱￿￿ ✱￿￿ ￿ 6SNU ￿ ￿ +ROG 6SNU ￿

SELECT = Port Number(s) Enter the port number(s) of the station(s) being defined.

To add a port range, enter

XXX￿XXX (low port ✱ high port).

DATA ( 0 or 1)

0 = No digit restriction

1 = Digit restriction

		Toll Restriction	Toll Restriction
Processor	Port Range	Ports for DISA
			Class
		(R3.X)
DK14	000~009	010	1~4
DK40i	000~027	035	1~4
RCTUA	000~031	039	1~4
RCTUBA/BB	000~079	089	1~4
RCTUC/D	000~239	249	1~8
RCTUE/F	000~335	344	1~8

+ROG ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿ ￿ +ROG

Station Restriction Code (00~10)

00 = No Station Toll Restriction

01= Area Code toll Restriction and 0 or 1 as 1st digit

02= Area Code Toll Restriction and 0 or 1 as 1st digit

03	= Class 1	07	= Class 5
04	= Class 2	08	= Class 6
05	= Class 3	09	= Class 7
06	= Class 4	10	= Class 8

If dial “0” credit card calling must be allowed, use Program 43 to assign designated stations/CO lines to allow credit card calling.

		Toll Restriction	Toll Restriction
Processor	Port Range	Ports for DISA
			Class
		(R3.X)
B1CU1	000~055	089	1~4
B2CAU/BU	000~111	249	1~8
B3CAU/BU	000~191	249	1~8
B5CAU/BU	000~335	344	1~8

	Port Number		Program 16 Line		R4.3 and higher: If a Tie line is assigned in Program 16 for Toll Restriction and LCR on
			Group Number		tandem calls, assign a class of service in this program. Program ports 900~916 to
	900~916		00~16		match the Tie line group numbers 01~16, respectively.
Port No.		Digit Restriction Code		Station Restriction Code		Port No.	Digit Restriction Code	Station Restriction Code

Toll Restriction

Strata DK Programming 5/00 4-39