Toshiba dk14, DK40I, DK424I manual Program 79 Overview, 3-176, LEDs 01~12: Door Phone Ring

System & Station

Program 79 – Door Phone Ringing

Program 79 Overview

This program assigns the door phone ringing feature to ports.

LED 20: Muted Ring to Busy Electronic and Digital Telephone

If all electronic and digital telephones are busy and a door phone button is pressed, a muted ring tone can be sent to selected digital and electronic telephones, as defined with this program. (Only the lowest port in the appropriate ringing group will mute ring.)

LEDs 01~12: Door Phone Ring

When a door phone button is pressed, selected digital and/or electronic telephones will ring as assigned with this program. See Program 77-2 for an explanation of the door phone A, B, and C numbering scheme. (Use Program *79 to assign [DN] button LEDs to flash on telephones that are assigned to ring.)

Door phones will not ring attendant consoles or standard telephones. Ringing door phones will flash on idle console’s $QVZHU buttons, but will not alert a console that is in the busy mode. See Program 77-1 for door phone box port assignments.

3-176 Strata DK Programming 5/00