Toshiba DK424I, dk14, DK40I manual Program *12 Cesid Station Information, Program *12 Overview

E911

Program *12 – CESID Station Information

Program *12 – CESID Station Information

Processor Type: DK40i, all RCTUs and BCUs (Release 4.3)

Program Type: System

Initialized Default: Data Blank

✱￿ ✱￿￿ ￿ ✱￿￿ ✱￿￿ ￿ 6SNU ✱ ￿ ￿ +ROG ￿ 6SNU

Station Port Number (see legend)

; ￿￿￿￿￿ ; +ROG ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿ ￿ +ROG

X = Location CESID digits to send on CAMA trunk when station dials 911 (0~10 digits max.) See Program *11, LED 01 for 7 or 10 digits.

		Processor		Port Range
		DK14		000~009
		DK40i		000~027
		RCTUA		000~031
		RCTUBA/BB		000~079
		RCTUC/D		000~239
		RCTUE/F		000~335
Port	Location CESID		Port	Location CESID
	Digits			Digits

Processor	Port Range
B1CU	000~055
B2CAU/BU	000~111
B3CAU/BU	000~191
B5CAU/BU	000~335

Port	Location CESID	Port	Location CESID
	Digits		Digits

E911

Program *12 Overview

This program assigns the Caller Emergency Service Identification (CESID) information that will be sent to the CAMA trunk using Multi-Frequency (MF) signals.

When a station dials 911, the E911 feature causes the DK to seize the CAMA trunk and send 911, 11 or 1 (per Program *11-5) plus the station’s unique CESID information entered in this program. This CESID information is also sent to the displays of internal notification consoles and stations. The CESID information can be 7 or 10-digits maximum (per Program *11-0, LED 01). Note that the digits sent on the CAMA trunk are MF tones, so they cannot be checked with a DTMF test set.

The digits entered in this program for each station is normally a unique telephone number for each station or station location (i.e., office, room, building, etc.). The exact CESID digit format required

Strata DK Programming 5/00 8-11