Toshiba DK40I, dk14, DK424 Program 13 – Defining the Message Center, Program 13 Overview, 3-46

System & Station

Program 13 – Defining the Message Center

Program 13 – Defining the Message Center

Processor Type:

DK14, DK40i, all RCTUs and BCUs

Program Type:

Station

Initialized Default: No port assigned

✱

￿

✱￿￿

￿

✱￿￿

✱￿￿

￿

6SNU

￿

￿

+ROG

￿

6SNU

￿

+ROG

￿

6SNU

￿

￿

+ROG

￿

6SNU

￿

￿

+ROG

SELECT = 1

PORT = Station Logical Port Number

SELECT 6~9 are not used.

Enter the station logical port number of the station

to be defined as the Message Center.

For RS-232 SMDI and In Band (DTMF) voice mail

integration, enter the lowest QSTU2/KSTU2/

RSTU2 standard telephone port connected to the

Port Number

VM device (see notes below.)

Program 13 Overview

This program assigns a station as the Message Center.

Each digital, electronic and standard telephone can receive a maximum of four message waiting indications per [PDN] and each [PhDN] owned by the station. One of these four is reserved for the designated Message Center. The Message Center should be the customer’s main answering position.

Typically, the Message Center is a voice mail device, attendant console, a digital or electronic telephone with a DSS console (DDSS or HDSS), or an add-on module. If incoming traffic to a DDSS or HDSS console attendant is heavy, another station can be assigned as the Message Center.

Notes

●

●

●

The Message Center is allowed to perform “Message Waiting,” even if disallowed on all other stations.

Assign the Message Center to the customer’s main answering position: a station or the lowest port (in VM group) of the customer’s voice mail device (see Program 31 for voice mail group port assignments), whichever the customer specifies.

When using RS-232 SMDI or DTMF voice mail interface, all stations must also be assigned to the message center port in Program ￿32 and Program 13. This should be the lowest standard telephone port (QSTU2/KSTU2/RSTU2) connected to the VM device. This is also the same (lowest) port assigned in the Program 31 VM group and the lowest standard telephone port assigned in the Program ￿40 VM Distributed Hunt Group. Do not assign the VM DH Group port number (900~915) as the message center port.

3-46 Strata DK Programming 5/00