Toshiba DK424I 147, Program 60-8 Overview, Program Type System Initialized Default No digits

System & Station

Program 60-8 – Call Forward External (Remote Change, Security) ID Code

Program 60-8 – Call Forward External (Remote Change, Security) ID Code

Processor Type: DK14, DK40i, all RCTUs and BCUs

Program Type: System

Initialized Default: No digits

More Codes

✱

￿

✱￿￿

￿

✱￿￿

✱￿￿

￿

6SNU

￿

￿

+ROG

￿

6SNU

￿

‡‡‡

SELECT = 8

Telephone port number to which the CF Ext ID (security) code will be assigned.

+ROG ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿ ￿ +ROG

DATA = ID code (1~15 digits)

When entering less than 15 digits, enter digits, then press Hold.

LED Button 01 = blanks, erases data

LED Button 02 = a wild card (can be any digit from 1~9)

Processor Type	Port Range
DK14	000~009
DK40i	000~027
RCTUA	000~031
RCTUBA/BB	000~079
RCTUC/D	000~239
RCTUE/F	000~335

Processor Type	Port Range
B1CU	000~055
B2CAU/BU	000~111
B3CAU/BU	000~191
B5CAU/BU	000~335

System

Telephone Port	CF/EKT ID Code	Telephone Port	CF/EKT ID Code	Telephone Port	CF/EKT ID Code
Number	(1~15 digits)	Number	(1~15 digits)	Number	(1~15 digits)

& Station

Program 60-8 Overview

Changes a telephone’s External Call Forward destination to [PDNs] but not [PhDNs] from outside the system. The person that wishes to change the destination must call into a DISA CO line, enter the telephone’s [PDN] +￿￿￿￿￿ and then enter a security code plus the destination telephone number. CF/EXT ID code must be assigned to a telephone to allow callers to change the Call Forward-External destination of that telephone from a remote location by calling in on a DISA CO line.

The security code (1~15 digits) for each telephone is set with this program.

Important!

To allow Call Forward External, CO lines must be enabled for the following:

●

●

Two CO line connection in Program 10-1 and Program 15-5. Outgoing Access in Program 41 including DISA port numbers.

Strata DK Programming 5/00 3-147