Toshiba dk14, DK40I, DK424I manual Program *45-5– Overlap Area Code, Program *45-5Overview, 4-30

Toll Restriction

Program *45-5 – Overlap Area Code

Program *45-5 – Overlap Area Code

Processor Type: DK424, all RCTUs and BCUs (Release 4.3 and higher)

Program Type: Toll Restriction and LCR

Initialized Default: blank

✱￿ ✱￿￿ ￿ ✱￿￿

✱￿￿ ￿

6SNU ✱￿￿ ￿ +ROG ￿ 6SNU ￿

SELECT = 5

+ROG ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿ ￿ +ROG

OAC = 0~9 (3 digits)

Press LED Button 01 to delete a digit.

Address (1~8)

Overlap Area Codes (8 max.)

SELECT =

1

2

3

4

5

6

7

8

Program *45-5 Overview

DATA = (1~3 Digit Codes)

This program enables registering Overlap Area Codes (OAC). Overlapping area codes are not considered toll calls and do not require the caller to first dial a ￿. If a telephone number requires the caller to first dial a ￿, do not enter that area code in this program. Up to eight OACs can be registered.

Example: One city might have two different area codes; however, the telephone company considers calls between these two areas to be treated as local calls. To register this information into the DK switch, enter both area codes in this program. The OAC information is applied to ISDN calls, which require 10 digits.

ISDN Immediate Dialing is available for dialing OAC + OC + XXXX numbers. See “Program 35

–Station Class of Service” on Page 3-100, LED 15 for more information on ISDN Immediate Dialing.

4-30 Strata DK Programming 5/00