Toshiba dk14, DK40I, DK424I manual Program 39 Overview, Feature Buttons Assignments, 3-116

System & Station

Program 39 – Flexible Button Assignments

Program 39 Overview

Program 39 assigns features to the flexible buttons for individual telephones in the system. Several types of buttons can be assigned with this program, including:

♦Feature

♦[PDNs], [SDNs] and [PhDNs] – Message Waiting buttons can be assigned to [PhDNs]

♦Alert Signal (Buzz key)

Feature Buttons Assignments

You can assign commonly used telephone features to any flexible button (see Table 3-1). Button assignments can be different for individual telephones. Telephone users can also assign flexible buttons if their COS and/or if programming permits the feature on their telephone.

Strata AirLink handsets interfaced to the Strata DK using the RWIU/WWIS PCB have only six flexible buttons (4~9) available for programming.

Important!

●

●

DKi Admin programs a Pause on buttons 11~20 on 10-key telephones.

The /LQH button on the DKT2001 is flexible button 01. Only program a [PDN] onto this button. Do not program CO lines or secondary line appearances onto button 01 or in any other position. Since the system assigns CO lines 01~17 by default, be sure to remove any CO line appearances by programming them as Station Speed Dial buttons (code ✱).

Note If the 6SHHG￿'LDO￿6HOHFW button is removed, the ✱ key becomes the 6SHHG￿'LDO￿6HOHFW button. While on an outside call, the user must press ✱ then￿￿ to activate the ✱ and￿￿ DTMF tones for the duration of the call.

➤To assign features to flexible buttons

1.Complete Program 38 before Program 39. Initialized data assigns the keystrip pattern associated with Code 31 from Program 38.

2.Use “Program 39 – Flexible Button Assignments” on Page 3-115to indicate feature buttons. Use the programming sequence after this table to perform the following steps.

3.Program the port number or enter a range of port numbers.

4.Press the button that will be associated with the feature.

5.Enter the feature code.

6.Repeat this procedure until all feature buttons have been assigned.

Table 3-3 Feature Button Codes for Digital, Electronic, and Strata AirLink Wireless Telephones

Button Function	Button Labels	Code	Notes
Account Code	Account Code or ACCNT	450	Allows a Voluntary Account Code entry.
Alarm1	Alarm Reset or ALRM	477	Resets alarm condition system-wide.
Alert Signaling (see following pages)1
All Call Voice Page	All Call Page or AC	489	Pages up to 120 idle electronic or digital telephones
			over speaker.
Automatic Busy Redial	Auto Busy Redial or ABR	470	Sets ABR of busy outgoing number.
Automatic Callback Busy	Auto Callback or ACB	494	Sets ACB for station recalled by busy line.
Background Music1	Tel Set Music or BGM	478	Turns BGM On or Off through station speaker.
Call Forward All Calls	Call Frwd All Calls or CFAC	487	All calls forward to selected station.

3-116 Strata DK Programming 5/00