Toshiba dk14, DK40I, DK424I manual DK40i Base KSU, DK40i Expansion KSU, System & Station

System & Station

Program 03 for DK40i – Flexible PCB Slot Assignments

Program 03 for DK40i – Flexible PCB Slot Assignments

Processor Type: DK40i

Program Type: System

Initialized Default: PCB codes of PCBs installed prior to running Program 91-1 or Program 91-9 Code 00 for empty slots (15~18), Base KSU has codes for PCBs

more codes

✱￿ ✱￿￿ ￿ ✱￿￿ ✱￿￿ ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU

SELECT = Slot Number (00, 11~18)

CARD = PCB Code (See Reference Table)

+ROG ￿

Turn System Power Off (5 sec) then On

...or

Run Program 91-2

DK40i Base KSU

			TBSU,
	TMAU2	DKU	TCOU,	KSTU2	TCIU2
			TDDU or
			TBUU
Slot Number	00	11	12	13	14
PCB Code	91, 92 or	62 or	00, 11, 16,	00 or	00 or
	98	64	or 77	31	81
PCB Type
Options
Station/BRI
Port Numbers
CO/DID/BRI
Line Numbers

DK40i Expansion KSU

Cabinet Label	04	05	06	07
Slot Number	15	16	17	18
PCB Code
PCB Type
Options
Station/BRI Port Numbers
CO/Tie/DID/BRI/T1
Line Numbers

Notes

●For systems containing ISDN PCBs, immediately after running Program 03, make sure to run Program *60 to identify all station (NT/LT) and CO (TE) BRI circuits for each BRI circuit installed. Program *60 causes station port and CO line shifting on PCBs installed in higher slots that follow the BRI PCBs.

●Consult DK40i configuration section to check that the DK40i is configured properly.

●RPTU and RDTU can be installed in slot 15 or 17 only. If one of these PCBs is installed in slot 17, then slot 18 must be left vacant. If an RPTU or RDTU is installed in slot 15, then slots 16, 17, and 18 can be used for other PCBs.

●RWIU must be installed in slot 15 to provide 16 handsets or slot 17 to provided eight handsets.

PCB Code Reference Table

PCB Fixed Slot	Code	Ports/Type
Common Control	91	None
Common Control w K4RCU3	92	4 DTMF/ABR
Common Control w/K5RCU or	98	5 DTMF/ABR
K5RCU2
PIOU/PIOUS/RSSU/PEPU	41	None
PEKU	21	8 EKT
PEKU with EOCU	22	8 EKT
PEKU with DSS	23	8 EKT
PEKU with EOCU, DSS	24	8 EKT
PESU	25	2 SLT/4 EKT
PESU with EOCU	26
KSTU2/RSTU2/Stratagy DK	31	4 SLT/8 SLT/8VM
TCOU/PCOU/RCOU/RGLU2	11	4/CO
RCOU + RCOS	17	8 Loop CO
Base Unit DKT CKTs, PDKU,	61	8 DKT
and RWIU
Base Unit DKT CKTs	62	8 DKT
& PDKU w/ DIU or SP-OCA
Base Unit DKT CKTs and
PDKU with DSS (w/ or w/o	64	8 DKT
DIU or SP-OCA)
KCDU	65	2/CO, 4 DKT
KCDU SP-OCA or DIU	66	2/CO, 4 DKT
RDSU (RSTS)	27	4 DKT/4 SLT
RDSU (RSTS) with DIU or	28	4 DKT/4 SLT
SP-OCA
RDDU/TDDU	16	4 DID Lines
RDTU	71	T1 Lines 8 ch. (R4.3)
	72	T1 Lines 12 ch. (R4.3)
REMU	13	4-Tie Lines
RCIU2/RCIS/TCIU2	81	4 or 8 Caller ID
TBSU or RBSU	77	2 BRI S/T
TBUU or RBUU	75	BRI U interface (R4.3)
RBSU/RBSS	78	4 BRI S/T
RBUU/RBUS	76	2 BRI U ckts.
RPTU	83	12 PRI Lines (R4.3)
	84	8 PRI Lines (R4.3)
TSIU	No Code Required
None	00	None

3-4 Strata DK Programming 5/00