Toshiba dk14, DK40I, DK424I manual Program 31 Overview, 3-84

System & Station

Program 31 – Station Class of Service

Program 31 Overview

Program 31 sets most voice mail or External Auto Attendant port assignments. Each standard telephone port (QSTU2, RSTU2, RSTU, PSTU, PESU, RDSU, KSTU2, QSTU2) connected to a Toshiba Stratagy, Stratagy DK or VP voice mail system should have LEDs 04, 15, 16, 17, 18, 19, and 20, and one of the following: 05, 06, 07, or 08 turned On. These LED’s should be On for VM ports only, not for telephone ports.

LED 09 should be Off for VM Auto Attendant “blind” transfer and VM tandem CO line connection with automatic release. LED 09 should be On for VM Auto Attendant supervised transfer operation.

Example Programming Assignment to Set Up Voice Mail in a Distributed Hunt Group

	Program￿*32		008			VMG1 Message Center
	Program 13		010			VMG2 Message Center
			008 – Button 5 On			VMG1 RSTU VM Ports
			009 – Button 5 On
	Program 31
			010 – Button 6 On			VMG2 RSTU VM Ports
			011 – Button 6 On
			850 – 01	008		VMG1 DH Group Members
			850 – 02	009
	Program *40
			851 – 01	010		VMG1 DH Group Members
			851 – 02	011
					RS232C (SMDI)
						N/A on DK14	Voice Mail
Phones using					#008	DHG1/VMG1
		#200
voice mail							Machine 1
					#009
		#201
machine 1			008
Phones using					#010	DHG2/VMG2
		#202
voice mail					#011		Voice Mail
		#203
machine 2			010		Standard Telephone		Machine 2
							1565
					Voice Mail Ports

All ports assigned to a Voice Mail Group should also be assigned to a unique Distributed Hunt Group using Program ￿40. Each Program 31 Voice Mail Group must be associated with a unique Program ￿40 Distributed Hunt Group that hunts only to its own Voice Mail Group ports. (See above example of how to connect/program two voice mail/auto attendant machines and associate them with two different DH groups.)

♦If LED 15 or 19 is On, turn LED 17 On. If LED 20 is On, turn LEDs 17 and 19 On.

♦For SMDI or DTMF integration, turn On LEDs 04, 16, 17 and 18, and one of the following: 05, 06, 07, or 08 for all standard telephone ports connected to a VM unit.

♦Turn LED 19 and 20 Off if the VM unit does not respond properly to transfer recall (B-Tone) signals when using any type of Voice Mail Interface.

♦LED 09 – see above comments in Program Overview.

♦If CO lines direct ring VM ports via Program 81~89, the data in Programs ￿81, ￿84, and ￿87 must be blank.

Important! Do not assign Program 31 VM/AA options to built-in Auto Attendant digital announcer ports.

3-84 Strata DK Programming 5/00