Toshiba DK40I, dk14, DK424I manual Program 33 - Example, 3-94, 6SNU6SHDNHU+ROG, ~ or ~, +Rog

System & Station

Program 33 – [PDN]/ [PhDN] Station Hunting (Voice Calls Only)

On Ring-first systems, if a [PDN] appears on more than one button (on owner’s telephone), the DK will not hunt until all appearances of the [PDN] are in use.

On Voice-first systems, the system will hunt for an available station if any one of the [PDN] appearances is busy.

Program 33 - Example

	Action (press buttons+LED buttons)	LCD Response
1.	Use the programming LCD electronic or digital telephone connected to	No. N-N1
	physical port 005 - circuit 6.	Jan 20 Sun	06:43
	Make sure the programming button strip template is installed on the
	programming telephone. (See “Program 38 Digital and Electronic
	Telephone Keystrip Type” on Page 3-109.)
2.	✱￿✱￿￿✱￿✱￿	Program Mode
	Enter programming mode. (Do not press [DN] button.)
3.	6SNU￿￿6SHDNHU￿￿￿￿￿+ROG	Program = 33
	Access Program 33. System beeps after 6SNU￿￿6SHDNHU￿ is pressed	Data Store
	to indicate program number may be entered.
4.	6SNU￿￿6SHDNHU￿	33 Select =
	Prepare the system for a station port selection.
5.	￿￿￿~￿￿￿ or ￿￿￿~￿￿￿	33 Select = (000~335)
	Select the port number of the Hunt From station. A range of ports can	Hunt To =
	be entered as specified on the record sheet. After the Hunt From port
	is entered, press the ￿ button. Do not press ￿ when entering a range.
6.	￿￿￿~￿￿￿ or ￿￿￿~￿￿￿	33 Select = (000~335)
	Enter the port number of the Hunt To point, as recorded on the system	Hunt To = (000~335)
	record sheet. Press LED button 01 to delete a digit from Hunt To point
	ports.
7.	+ROG	33 Select = (000~335)
	Secure data in system programming.	Data Programmed
8.	6SNU￿￿6SHDNHU￿	33 Select = ##
	Prepare system for another selection (go back to Step 5), or exit
	Program 33 (continue with Step 9).
9.	￿￿￿+ROG	33 Select =
	Secure Program 33 data in system memory.	Data Programmed
10.	6SNU￿￿6SHDNHU￿	Program =
	Exit Program 33. Enter another program number or exit programming
	mode (go to Step 11). Speaker beeps to indicate it is exiting
	Program 33.
11.	￿￿￿+ROG		No. N-N
	Exit programming mode.	Jan 20 Sun	06:58

1. N-N = Program telephone [PDN]

3-94 Strata DK Programming 5/00