Toshiba DK424, dk14 manual Program 45-1– LCR/Toll Restriction Dial Plan, Program 45-1Overview, 4-15

Toll Restriction

Program 45-1 – LCR/Toll Restriction Dial Plan

Program 45-1 – LCR/Toll Restriction Dial Plan

Processor Type:	DK14, DK40i, all RCTUs and BCUs
Program Type:	Toll Restriction
Initialized Default:	Assigns Dial Plan 7 to the system (current North American Numbering Plan)

✱￿ ✱￿￿ ￿ ✱￿￿

✱￿￿ ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿

SELECT = 1

+ROG ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿ ￿ +ROG

DATA = Plan 1~9

Enter Codes 1~9 to indicate the dial plan for the system.

X	Plan	Toll Restriction/LCR Dial Plans
	9	(101XXXX)+1+NXX+NXX/NXX
	8	(101YXXX)+1+NXX+NXX/NXX
	7	(10XXX)+1+NXX+NXX/NXX
	6	For UK only.
	5	0+ (0+ and universal (Codes 5 and 4) are not used in USA.)
	4	Universal (0+ and universal (Codes 5 and 4) are not used in USA.)
	3	(10XXX)+1+AC+NXX/NXX
	2	(10XXX)+1+AC+NXX/1+NNX
	1	(10XXX)+AC+NXX/1+NNX
Where:
In NXX and NNX,
X =	0~9
N =
	2~9
NXX =	Office code (interchangeable with area and office codes; second digit can be
	0~9)
NNX =	Office code (not interchangeable; second digit cannot be 1 or 0)
AC =	Area Code
1+ NNX =	1 may be dialed before office codes
10XXX =	old 5-digit Carrier Access Codes
101YXXX/101XXXX = new 7-digit Carrier Access Codes
Y =	0, 5 or 6

Program 45-1 Overview

This program enables you to define a dial plan for the Toll Restriction software to recognize the typical dialing sequence of long distance/local calls made from the system’s home area code, and to identify area and office codes. The dialing plan defines several components of a telephone number for long distance calling

Notes

●Setting the proper dialing plan in this program is also required for the Least Cost Routing feature to function properly.

Toll Restriction

Strata DK Programming 5/00 4-15