Toshiba dk14, DK40I, DK424I manual Program *68-1Overview, 7-41, LED 01: Outgoing Caller ID

ISDN

Program *68-1 – Calling Number ID Presentation Parameters

Program *68-1 – Calling Number ID Presentation Parameters

Processor Type:

DK40i, all RCTUs (Release 4.0 or higher) and BCUs

Program Type:

Trunk, PRI and BRI

Initialized Default: All LEDs Off

✱￿￿

✱￿￿

￿

✱￿￿

✱￿￿

￿

6SNU

✱

￿

￿

+ROG

￿

6SNU

￿

+ROG

￿

6SNU

￿

￿

+ROG

￿

6SNU

￿

￿

+ROG

SEL = 1

DATA = Press LED Buttons 01~03 for the

desired Calling Number ID parameters.

Enter the Trunk Group

See table below.

(01~16)

LED

Caller ID Setting

Trunk Groups

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

1

Outgoing Caller ID

(On = Allowed / Off = Not Allowed)

2

Outgoing Caller ID Status Change:

On = Allowed / Off = Not Allowed

3

Incoming Caller ID Source:

On = Network Provided Off = Caller Provided

Program *68-1 Overview

This program assigns the Number Privacy feature, which allows the caller to prevent the public network from delivering the Calling Number to the called party on a per-call basis. The Public Switched Telephone Network (PSTN) may still provide a network-based Caller ID, even when the outgoing Caller ID is Off Only a subscription parameter can change that.

LED 01: Outgoing Caller ID

Service subscribers can request from the public network that the number be presented or not as a default.

LED 02: Outgoing Caller ID Status Change

If a public telco service allows changes to be made, then a user can enter change a code to the setting for that call after selecting a trunk group.

LED 03: Incoming Caller ID Source

When LED 03 is On, the calling number with the call setup message is provided by the network; Off indicates that this information is sent from the caller. The Strata DK handles the number the same way that ANI information from T1 trunks is handled. For instance, the number can display on the called telephone’s LCD, or it can be used by TAPI interfaces, or it can be recorded in SMDR data records.

The PSTN may send one or two Caller ID messages for incoming calls. One message is the Caller ID supplied by the network, which is generally the billing number, while the second is the user generated number. The Strata DK will use the user-supplied number, if required.

Note Individual callers can choose to block this information, regardless of this setting.

ISDN

Strata DK Programming 5/00 7-41