Toshiba DK424 Program 90 Example, Initialization & Test, Program 90 – Initialize Programs 00~*99

Initialization & Test

Program 90 – Initialize Programs 00~*99

Program 90 Example

	Action	LCD Response
1.	Use the LCD programming phone per Minimum Hardware		No. N-N1
	Requirements on Page 1-14.	Jan 20 Sun	06:43
2.	Enter Program mode by pressing ✱￿✱￿￿✱￿✱￿.￿(Do not press [DN]	Program Mode
	button.)
3.	6SNU￿￿6SHDNHU￿￿￿￿￿+ROG	Program = 90
	Access Program 90. System beeps after 6SNU￿￿6SHDNHU￿ is pressed		Data Store
	to indicate program number may be entered.
4.	6SNU￿￿6SHDNHU￿	90 Select =
	Prepare the system for the programs to be initialized.			Initialization
5.	￿￿✱✱￿￿+ LED buttons 01 & 02	90 Select = 00**99
	Enter Program numbers individually, followed by #, or in a range. For a	Data Clr
	range, separate the low program number and the high program
	number with an asterisk.			&
	￿￿✱✱￿￿ initializes all Programs 00~￿99.
				Test
	Star ✱ Program memory follows Program 97.
6.	+ROG	90 Select = 00**99
	Secure data in system programming. LEDs 01 and 02 flash.	Data Programmed
7.	6SNU￿￿6SHDNHU￿	90 Select =
	Prepare system for another selection (go back to Step 5) or exit
	Program 90 (continue with Step 8).
8.	￿￿+ROG	90 Select = ##
	Secure default data in system memory. LED 01 and 02 continue to	Data Programmed
	flash.
9.	6SNU￿￿6SHDNHU￿	Program =
	Exit Program 90. Enter another program number (see “Program 92
	Example” on Page 2-10) or exit programming mode (go to Step 10).
	System beeps to indicate it is exiting Program 90.
10.	￿￿+ROG		No. N-N
	Exit programming mode.	Jan 20 Sun	06:43
	The system will not allow the 6SNU￿￿6SHDNHU￿ LED to light to re-
	enter the programming mode.

1. N-N is the Program Telephone [DN].

Strata DK Programming 5/00 2-5