Toshiba dk14, DK40I, DK424I Program 00 Part 1 - Overview, Program 00 Part 1 - Example, 2-13

Initialization & Test

Program 00 – Part 1: Software Check

Program 00 Part 1 - Overview

This program enables you to run various checks on the Strata DK System.

DK14: the QKYS feature key must be installed on the QRCU3 PCB to allow AA.

DK40i: the KKYS feature key must be installed on the K5RCU PCB to allow AA.

DK424 and DK424i: the RKYS feature key must be installed on the RCTU or BCU to allow AA, ACD, and ACD/MIS.

Code 0, ROM Version

Code 0 displays the software version of the system processor PCB or on the DK40i Base KSU, or DK14 KSU, and if installed, the RKYS, KKYS, or QKYS key type. See the Program 00 Record Sheet for an illustration of software displays. This information cannot be altered with this program.

Code 1, Level 1 Security Code

Use to assign a Remote Maintenance security code that allows entry to all programs and data.

Code 2, Level 2 Security Code

Use this program to assign a Remote Maintenance security code that allows entry to Programs 30~39, 77~89, and ￿30~￿31.

Important! When using a DKi Admin PC, either Security Code (1 or 2) enables the DKi Admin user full access to all Strata DK programs. Always change Security Code 1 and Code 2 to prevent unauthorized programming changes by DKi Admin users that may try to log-in remotely with the default security code: 0000.

Code 8, Software RAM Checksum and Code 9, Power Off Counter

For factory purposes only.

Program 00 Part 1 - Example

	Action (press buttons + LED Buttons)	LCD Response
1.	Use the programming LCD electronic or digital telephone. (See “First-		No. N-N1
	time Programming” on Page 1-14.)	Jan 20 Sun	06:43
2.	✱￿✱￿￿✱￿✱￿	Program Mode
	Enter programming mode. (Do not press [DN] button.)
3.	6SNU￿￿6SHDNHU￿￿￿￿￿+ROG	Program = 00
	Speaker beeps to indicate when to enter program number. Access		Data Store
	Program 00.
4.	6SNU￿￿6SHDNHU￿	00 Select =
	Prepare system for a selection.
5.	Select one of the following attributes:
		00 Select = 0
	￿	RNAXNN-Key X
	View the software version. This attribute can not be edited.	Note NN = The actual version
	or...	number and letter. See Program
		00 record sheet for details).
		X = 1, 2, or 3.

Initialization & Test

Strata DK Programming 5/00 2-13