Toshiba DK424I, dk14, DK40I manual Program 50-2– LCR Home Area Code, Program 50-2Overview

Models: DK40I dk14

1 424
Download 424 pages 49.24 Kb
Page 279
Image 279
LED Button 04: Dial Tone After LCR Access

Least Cost Routing

Program 50-2 – LCR Home Area Code

LED Button 04: Dial Tone After LCR Access

LED 04 On: Station users hear a simulated dial tone immediately after dialing the access LCR code (typically 9), until the first digit of the phone number is dialed. The dial tone is simulated to assure the user of the system’s proper operation, but it is not a functional dial tone.

For HMIS, set LED 04 On.

If LED 04 is Off, station users hear nothing after dialing the LCR access code until the destination rings or issues a busy signal.

LED Button 05: Warning Tone Last Choice Route Number

LED 05 On: The user is notified with a warning tone to indicate that LCR has routed the call over the least desirable route number. The most expensive route is typically programmed to be the least desirable. A user has three choices upon hearing the warning tone:

Ignore the tone, LCR places the call using the least desirable route.

Hang up and try later to save money.

Activate the Automatic Call Back feature. The appropriate line group calls the user back when a more desirable route number becomes available.

LED 05 Off: No warning tone sounds.

Program 50-2 – LCR Home Area Code

Processor Type: DK14, DK40i, all RCTUs and BCUs

Program Type:

Least Cost Routing

Initialized Default: Leaves the home area code blank

￿ ￿￿ ￿ ￿￿

￿￿ ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿ Program 50-2 – LCR Home Area CodeProgram 50-2 Overview

Manual backgroundManual background +ROG

￿

6SNU ￿ ￿ +ROG

￿

6SNU ￿ ￿ +ROG

SELECT = 2

DATA = Home (local) area Code

Program 50-2 Overview

LCR matches the area code entered here with the LCR route plan containing the home area code in its Area Code Table. (The home area code is later entered into one of the available LCR route plans through Program 51). Thus, LCR is informed of how to handle local calls.

Typically, systems are configured to have the LCR route plan containing the home area code as the same as the local route plan defined in Program 50-5. Typically you would program it to be Route Plan Number 1, rather than the default Plan 16.

Least Cost Routing

Strata DK Programming 5/00

5-5

Page 279
Image 279
Toshiba DK424I, dk14 Program 50-2– LCR Home Area Code, Program 50-2Overview, LED Button 04: Dial Tone After LCR Access