Toshiba DK424I, dk14, DK40I manual Program 44-1~8Overview, 4-13

Toll Restriction

Program 44-1~8 – Toll Restriction/Traveling Class Override Codes

Program 44-1~8 – Toll Restriction/Traveling Class Override Codes

Processor Type: DK14, DK40i, all RCTUs and BCUs

Program Type: Toll Restriction

Initialized Default: All Classes Blank (no code)

✱￿ ✱￿￿ ￿ ✱￿￿ ✱￿￿ ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU +ROG ￿ 6SNU ￿ ￿ +ROG ￿ 6SNU ￿ ￿ +ROG

SELECT = Toll Restriction Class 1~8					DATA = Toll Restriction Code for Selected Class (1~4 digits)
	Processor	Toll Restriction Class			Processor	Toll Restriction Class
	DK14	1~4		RCTUBA/BB, B1CU		1~4
	DK40i	1~4	RCTUC/D, B2CAU/BU, B3CAU/BU			1~8
	RCTUA	1~4		RCTUE/F, B5CAU/BU		1~8

Toll Restriction Class

SELECT =

1

2

3

4

5

6

7

8

Program 44-1~8 Overview

DATA = (1~4 Digit Code)

This program enables you to assign a code for each of the Toll Restriction classes established in Program 46. If one of these codes is entered at a station, the station assumes the code’s class for that call. When the call is complete, the station returns to its regular class assigned in Program 48. The Traveling Class code data is not sent out the SMDR port and does not print out on station call records. Account Codes (Forced or Voluntary) can also be used for this function, in which case the Account Code will print out on SMDR (see Programs 69 and 70).

Notes

●Stations selected in Program 30, LED 16 On, can add, change, or delete the codes set in Program 44-1~8.

●When the Toll Restriction Override code is dialed, the station's class (defined in Program 48) changes to the class assigned to the code in Program 44-1~8.

●Do not use the same codes set in Program 45 (8 and 9).

●Stations enabled in Program 30, Button/LED 16 On, are allowed to enter and change Toll Restriction Class (1~8) override codes.

Toll Restriction

Strata DK Programming 5/00 4-13