Toshiba DK424I, dk14, DK40I manual 3-143, See Program *15 for Tenant Group assignments

				System & Station
			Program 59 – Attendant Console Flexible Button Codes
Table 3-8	Additional Feature Button Codes (continued)
Button Function		Button Labels	Code	Notes
Call Park and Page		Call Park/Page or CP/PG	463	Parking and Paging Park Pickup.
Call Pickup (Directed)		Directed Pickup or PKUP	484	Picks up ringing or held intercom, trunk
				calls, and page.
Call Pickup (Group)4		Group Pickup	480	Picks up a call to any group to which
				station is assigned in *31.
Do Not Disturb		Do Not Disturb or DND	498	Prevents calls to station.
				Separates the called party’s ISDN sub-
ISDN Sub-address		Sub-address	467	address from the called party number.
				The ￿ digit performs this function on
				standard telephones.
				Initiates DK to send dialed digits to the
				ISDN network when this button is pressed
ISDN Start		Start	469	from a digital or electronic telephone.
				Program *63-2 invokes the same function
				when the Dial Timer expires. Also see
				Tone Button in this table.
LCD Message Select		LCD Msg Select or LCD M	481	Begins LCD message selection.
Night Transfer Lock		Night Lock1 or NT1 L1~Night Lock4		Used to lock system ringing mode: DAY,
Tenant 1~Night Transfer			431~434	DAY2, NIGHT See Programs 74 and *36
		or NT4 L4
Lock Tenant 4				for NT Lock Password assignments.
				Simulates On-hook/Off-hook operation to
Release and Answer		Release and Ans and RLS/ANS	466	release an existing call and answer new
				incoming/ringing call.
Save Last Dialed Number		Save Last Number or SAVE	485	Saves last number dialed for future speed
				dial.
					System
				Reserves button for station speed dial for
				the following processors:
Station Speed Dial Codes		SD	*10~*49	RCTUBA/BB, B1CU	&
			*10~*49	RCTUC/D, B2CAU/BU, B3CAU/BU
					Station
			*100~*139	Speed dial number is set by station port
				RCTUE/F, B5CAU/BU
				000.
System Speed Dial Codes		SD	*600~*699	RCTUBA/BB, B1CU
			*600~*699	RCTUC/D, B2CAU/BU, B3CAU/BU
			*200~*999	RCTUE/F, B5CAU/BU
				CO dial signals set to tone or pulse.
Tone		Tone Dial Select or TONE	490	For ISDN applications, after the user
				presses the Tone Dial Select button, any
				digits dialed after it is will be sent using
				DTMF tones.
Notes116

●

●

●

●

See Program *15 for Tenant Group assignments.

Picks up calls to telephones in any call pickup group to which the telephone is assigned in Program *31.

Attendant consoles cannot be equipped with [SDNs] or [PhDNs]. The console [DN] is assigned to the console port number in Program 04. The console’s [DN] can have only one appearance.

Attendant consoles cannot be equipped with [PDNs], [SDNs], or [PhDNs]. The [In-DN] button is the console’s [DN], assigned in Program 04; it supports incoming calls only and can only appear once on a console.

Strata DK Programming 5/00 3-143