•. = (period) any single character (including a white
space).
•* = (asterisk) the sequences in a pattern (zero or more
sequences).
•+ = (plus) the sequences in a pattern (one or more
sequences).
•? = (question mark) sequences in a pattern (either zero or
one sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to
entering the ? regular expression.
•[ ] = (brackets) a range of single-character patterns.
•( ) = (parenthesis) groups a series of pattern elements
to a single element.
•{ } = (braces) minimum and the maximum match count.
•^ = (caret) the beginning of the input string. If you use
the caret at the beginning of a sequence or range, it
matches on everything BUT the characters specified.
•$ = (dollar sign) the end of the output string.
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF for the S4810, S4820T, and S6000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information The following describes the show ip bgp path command shown in the
following example.
Field Description
Total Displays the total number of BGP path attributes.
Border Gateway Protocol 443