Related Commands

Version

Description

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to 16 characters long.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0

Introduced on the E-Series.

match interface — redistributes routes that match the next-hop interface.

match ip address — redistributes routes that match an IP address.

match ip next-hop — redistributes routes that match the next-hop IP address.

match metric — redistributes routes that match a specific metric.

match route-type — redistributes routes that match a route type.

match tag — redistributes routes that match a specific tag.

match metric

To match on a specified value, configure a filter.

Syntax

Parameters

Defaults

Command Modes

Command History

match metric metric-value

To delete a value, use the no match metric [metric-value]command.

metric-value

Enter a value to match. The range is from zero (0) to

 

4294967295.

Not configured.

 

ROUTE-MAP

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

252

Access Control Lists (ACL)

Page 252
Image 252
Dell 9.7(0.0) manual Match metric metric-value, Metric-value