Dell 9.7(0.0) Show ip igmp groups, Syntaxshow ip igmp vrf vrf-name groups group-address detail

Command Modes

Command History

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Changed the default IGMP from version 2 to version 3.
	Introduced on the S6000-ON
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

9.2(0.0)	Introduced on the M I/O Aggregator. This command is
	supported in Programmable-Mux (PMUX) mode only.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

7.5.1.0Introduced on the E-Series.

show ip igmp groups

View the IGMP groups.

S6000

Syntaxshow ip igmp [vrf vrf-name] groups [group-address [detail]

detail interface [group-address [detail]]]

Parameters	(OPTIONAL) Enter the keyword vrf followed by the name of
vrf vrf-name
	the VRF to configure this setting on that VRF.
group-address	(OPTIONAL) Enter the group address in dotted decimal
	format to view information on that group only.
interface	(OPTIONAL) Enter the interface type and slot/port
	information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a Loopback interface, enter the keyword loopback
	then a number from 0 to 16383.

Internet Group Management Protocol (IGMP) 647