Dell 9.7(0.0) manual Lease days hours minutes infinite, Days, Hours, Infinite

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the C-Series and S-Series.

lease

Specify a lease time for the addresses in a pool.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

lease {days [hours] [minutes] infinite}

days	Enter the number of days of the lease. The range is from 0 to
	31.
hours	Enter the number of hours of the lease. The range is from 0
	to 23.
minutes	Enter the number of minutes of the lease. The range is from
	0 to 59.
infinite	Specify that the lease never expires.
24 hours
DHCP <POOL>

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the C-Series and S-Series.

Dynamic Host Configuration Protocol (DHCP) 553