Dell 9.7(0.0) manual Clear ip pim tib, Clear ip pim vrf vrf-name tib group, Group

VersionDescription

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the S-Series.

Usage	This command re-applies the RP mapping logic for all the groups learnt by the
Information	node. Any stale information corresponding to the existing mapping configuration is
	updated. As a result, the existing BSR cache and the *,G's are deleted only if these
	entries are stale.

clear ip pim tib

Clear PIM tree information from the PIM database.

S6000

Syntax

Parameters

Command Modes

Command History

clear ip pim [vrf vrf-name] tib [group]

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to configure this setting on that VRF.
	NOTE: Applies to specific VRF if input is provided, else
	applies to Default VRF.
group	(OPTIONAL) Enter the multicast group address in dotted
	decimal format (A.B.C.D).
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the S-Series.

1188 PIM-Sparse Mode (PIM-SM)