Dell 9.7(0.0) manual Ip tftp vrf, Related Telnet telnet to another device Commands

Related	telnet — telnet to another device.
Commands

ip tftp vrf

Configures an TFTP client with a VRF that is used to connect to the TFTP server.

Syntax ip tftp [vrf vrf-name]

Parameters

Defaults

Command Modes

Command History

Usage Information

Related Commands

To undo the TFTP client configuration, use the no ip tftp [vrf vrf-name]command.

vrf vrf-name	Enter the keyword vrf and then the name of the VRF to
	specify the VRF that is used by the TFTP client.
Disabled
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.
9.4.(0.0)	Introduced on the S-Series and Z9000.

Use this command to make the TFTP clients VRF aware. The VRF name that you specify is used by the TFTP client to reach the TFTP server. If no VRF is specified, then the default VRF is used.

ftp-server topdir — sets the directory to be used for incoming FTP connections.

ftp-server username — sets a username and password for incoming FTP connections.

Control and Monitoring 115