Dell 9.7(0.0) manual Snmp-server location text

Models: 9.7(0.0)

1 1684
Download 1684 pages 18.66 Kb
Page 1491
Image 1491

Related Commands

trap types are enabled for the host. If you do not enter an snmp-server host command, no notifications are sent.

In order to enable multiple hosts, issue a separate snmp-server host command for each host. You can specify multiple notification types in the command for each host.

When multiple snmp-server host commands are given for the same host and type of notification (trap or inform), each succeeding command overwrites the previous command. Only the last snmp-server host command will be in effect. For example, if you enter an snmp-server host inform command for a host and then enter another snmp-server host inform command for the same host, the second command replaces the first command.

The snmp-server host command is used with the snmp-server enable command. Use the snmp-server enable command to specify which SNMP notifications are sent globally. For a host to receive most notifications, at least one snmp-server enable command and the snmp-server host command for that host must be enabled.

NOTE: For v1 / v2c trap configuration, if the community-string is not defined using the snmp-server community command prior to using this command, the default form of the snmp-server community command automatically is configured with the community-name the same as specified in the snmp- server host command.

Configuring Informs

To send an inform, use the following steps:

1.Configure a remote engine ID.

2.Configure a remote user.

3.Configure a group for this user with access rights.

4.Enable traps.

5.Configure a host to receive informs.

snmp-server enable traps — enables SNMP traps.

snmp-server community — configures a new community SNMPv1 or SNMPv2c.

snmp-server location

Configure the location of the SNMP server.

Syntax

snmp-server location text

 

To delete the SNMP location, use the no snmp-server location command.

Parameters

text

Enter an alpha-numeric text string, up to 55 characters long.

 

Simple Network Management Protocol (SNMP) and Syslog

1491

Page 1491
Image 1491
Dell 9.7(0.0) manual Snmp-server location text