Dell 9.7(0.0) manual Default-information originate, Type-value

Example	Dell#debug ip ospf 1 packet
	OSPF process 90, packet debugging is on
	Dell#
	08:14:24 : OSPF(100:00):
	Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
	aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Te 4/3 dst:
	224.0.0.5
	netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
	hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0

default-information originate

To generate a default external route into an OSPF routing domain, configure Dell Networking Operating System (OS).

Syntaxdefault-information originate [always] [metric metric-value]

[metric-type type-value] [route-map map-name]

To return to the default values, use the no default-information originate command.

Parameters

Defaults

Command Modes

Command History

always	(OPTIONAL) Enter the keyword always to specify that
	default route information must always be advertised.
metric metric-	(OPTIONAL) Enter the keyword metric then a number to
value	configure a metric value for the route. The range is from 1 to
	16777214.
metric-type	(OPTIONAL) Enter the keywords metric-typethen an
type-value	OSPF link state type of 1 or 2 for default routes. The values
	are:
	• 1 = Type 1 external route
	• 2 = Type 2 external route
route-map	(OPTIONAL) Enter the keywords route-mapthen the name
map-name	of an established route map.
Disabled.
ROUTER OSPF

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

Open Shortest Path First (OSPFv2 and OSPFv3) 1069