Dell 9.7(0.0) manual Show vlt detail, Show vlt inconsistency ip mroute

show vlt detail

Displays detailed status information about VLT domains currently configured on the switch.

Syntax	show vlt detail
Default	Not configured.
Command	EXEC
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.
	Version		Description
	9.7(0.0)		Introduced on the S6000-ON.
	9.5(0.0)		Introduced on the Z9500.
	9.0.2.0		Introduced on the S6000.
	9.0.0.0		Introduced on the Z9000.
	8.3.19.0		Introduced on the S4820T.
	8.3.8.0		Introduced on the S4810.
Example	Dell# Dell(conf-if-vl-100)#show vlt detail
	Local LAG Id Peer LAG Id Local Status Peer Status Active VLANs
	-------------------------	----------- ------------ ------------
		10	UP	UP	100, 200, 300,
	10
	400,

show vlt inconsistency

Display run-time inconsistencies in the incoming interface (IIF) for spanned multicast routes.

Syntax	show vlt inconsistency ip mroute
Command	EXEC
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

1638 Virtual Link Trunking (VLT)