for-bgp Dell(conf-router_ospf)#exit

Dell(conf)#show ip ospf

Routing Process ospf 10 with ID 100.1.1.1 Virtual router default-vrf

Supports only single TOS (TOS0) routes It is an Area Border Router

Originating router lsas with maximum metric Time remaining 00:07:07

Condition : On-Startup while BGP is converging for 600 secs.

State : Active

SPF schedule delay 5 secs, Hold time between two SPFs 10 secs Convergence Level 0

Min LSA origination 5 secs, Min LSA arrival 1 secs

Number of area in this router is 2, normal 2 stub 0 nssa 0 Area BACKBONE (0)

Number of interface in this area is 1 SPF algorithm executed 3 times

Area ranges are Area 1

Number of interface in this area is 1 SPF algorithm executed 3 times

Area ranges are

Dell(conf)#show ip ospf database router

Exception Flag: Announcing maximum link costs

LS age: 198

Options: (No TOS-capability, DC)

LS Type: Router Links

Link State ID: 2.1.1.1

Advertising Router: 2.1.1.1

LS Seq Number: 80000005

Checksum: 0x9F5D

Length: 48

Number of Links: 2

passive-interface

Disable (suppress) sending routing updates on an interface.

Syntax

passive—interface interface

 

To enable sending routing updates on an interface, use the no passive-

 

interface interface command.

Parameters

 

interface

Enter the following keywords and slot/port or number

 

information:

 

• For a 10-Gigabit Ethernet interface, enter the keyword

 

TenGigabitEthernet then the slot/port information.

 

• For a 40-Gigabit Ethernet interface, enter the keyword

 

fortyGigE then the slot/port information.

 

• For a port channel interface, enter the keywords port-

 

channel then a number. The range is from 1 to 128.

Open Shortest Path First (OSPFv2 and OSPFv3)

1163

Page 1163
Image 1163
Dell 9.7(0.0) manual Passive-interface, Interface interface command