Dell 9.7(0.0) manual Private-vlan mapping secondary-vlan, Vlan-list

Usage Information

Related Commands

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the C-Series and S-Series.

The VLAN:

•can be in only one mode, either community, isolated, or primary.

•mode ode to community or isolated even before associating it to a primary VLAN. This secondary VLAN continues to work normally as a normal VLAN even though it is not associated to a primary VLAN. (A syslog message indicates this.)

•must not have a port in it when VLAN mode is being set.

Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk ports (as previously described) can be added to the PVLAN. No other regular ports can be added to the PVLAN.

After using this command to configure a VLAN as a primary VLAN, use the private-vlan mapping secondary-vlancommand to map secondary VLANs to this VLAN.

private-vlan mapping secondary-vlan — maps secondary VLANs to the selected primary VLAN.

switchport mode private-vlan — sets PVLAN mode of the selected port.

private-vlan mapping secondary-vlan

Map secondary VLANs to the selected primary VLAN.

S6000

Syntax[no] private-vlan mapping secondary-vlan vlan-list

To remove specific secondary VLANs from the configuration, use the no private-vlan mapping secondary-vlanvlan-listcommand syntax.

Parameters	vlan-list	Enter the list of secondary VLANs to associate with the
		selected primary VLAN. The list can be in comma-delimited
		or hyphenated-range format, following the convention for
		the range input.

Private VLAN (PVLAN) 1225