Dell 9.7(0.0) manual Set community, Local-AS

Usage Information

Related Commands

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

The community list used in the set comm-list delete command must be configured so that each filter contains only one community. For example, the filter deny 100:12 is acceptable, but the filter deny 120:13 140:33 results in an error.

If the set comm-list delete command and the set community command are configured in the same route map sequence, the deletion command (set comm-list delete) is processed before the insertion command (set community).

match community — redistributes routes that match the COMMUNITY attribute.

set community — specifies a COMMUNITY attribute.

set community

Allows you to assign a BGP COMMUNITY attribute.

Syntaxset community {community-number local-as no-advertise no- export none} [additive]

To delete a BGP COMMUNITY attribute assignment, use the no set community {community-numberlocal-as no-advertise no-export none} command.

Parameters

community-	Enter the community number in AA:NN format where AA is
number	the AS number (2 bytes) and NN is a value specific to that
	autonomous system.
local-AS	Enter the keywords local-ASto drop all routes with the
	COMMUNITY attribute of NO_EXPORT_SUBCONFED.

260 Access Control Lists (ACL)