Usage Information

Example

Example

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

Version 9.0.2.0

Introduced on the S6000.

Version 8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

The following describes the interface command shown in the following example. This example sets a port as hybrid, makes the port a tagged member of VLAN 20, and an untagged member of VLAN 10, which becomes the native VLAN of the port. The port now accepts:

untagged frames and classify them as VLAN 10 frames

VLAN 20 tagged frames

The following describes the do show interfaces command shown in the following example. This example shows output with “Hybrid” as the newly added value for 802.1QTagged. The options for this field are:

True — port is tagged

False — port is untagged

Hybrid — port accepts both tagged and untagged frames

The following describes the interface vlan command shown in the following example. This example shows unconfiguration of the hybrid port using the no portmode hybrid command.

NOTE: Remove all other configurations on the port before you can remove the hybrid configuration from the port.

Dell(conf)#interface tengigabitethernet 7/1 Dell(conf-if-gi-7/0)#portmode hybrid Dell(conf-if-gi-7/0)#interface vlan 10 Dell(conf-if-vl-10)#untagged tengigabitethernet 7/1 Dell(conf-if-vl-10)#interface vlan 20 Dell(conf-if-vl-20)#tagged tengigabitethernet 7/1 Dell(conf-if-vl-20)#

Dell(conf-if-vl-20)#do show interfaces switchport Name: TenGigabitEthernet 7/1

802.1QTagged: Hybrid Vlan membership: Vlan 10, Vlan 20 Native VlanId: 10 Dell(conf-if-vl-20)#

696

Interfaces

Page 696
Image 696
Dell 9.7(0.0) manual 696