Dell 9.7(0.0) manual Distance, Enter a description to identify the IS-IS protocol

Parameters	description	Enter a description to identify the IS-IS protocol (80
		characters maximum).
Defaults	none
Command	ROUTER ISIS
Modes
Command	Version	Description
History
	9.7(0.0)	Introduced on the S6000-ON.
	9.0.2.0	Introduced on the S6000.
	8.3.19.0	Introduced on the S4820T.
	8.3.12.0	Introduced on the S4810.
	8.3.11.1	Introduced on the Z9000.
	pre-7.7.1.0	Introduced.
Related	router isis — Enter ROUTER mode on the switch.
Commands

distance

Define the administrative distance for learned routes.

Syntax

Parameters

Defaults

Command Modes

Command History

distance weight [ip-address mask [prefix-list]]

To return to the default values, use the no distance weight command.

weight	The administrative distance value indicates the reliability of a
	routing information source. The range is from 1 to 255. (A
	higher relative value indicates lower reliability. Routes with
	smaller values are given preference.) The default is 115.
ip-address	(OPTIONAL) Enter an IP address in dotted decimal format
mask	and enter a mask in either dotted decimal or /prefix format.
prefix-list	(OPTIONAL) Enter the name of a prefix list name.
weight = 115

•ROUTER ISIS (for IPv4)

•CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

Intermediate System to Intermediate System (IS-IS) 853