Dell 9.7(0.0) manual Example S- Series Usage Information

Example (S- Series)

Usage Information

Example (S- Series)

Dell#test cam-usage service-policy input In stack-unit all Stack-Unit Portpipe CAM Partition Available CAM Estimated CAM per Port Status

---------------------------------------------------------------

-----------------------

0 0 IPv4Flow 102 0 Allowed

0 0 IPv4Flow 102 0 Allowed Dell#

!

Dell#test cam-usage service-policy input In stack-unit 0 port- set 0

Stack-Unit Portpipe CAM Partition Available CAM Estimated CAM per Port Status

---------------------------------------------------------------

------------------------

0 0 IPv4Flow 102 0 Allowed Dell#

The following describes the test cam-usagecommand shown in the Example below.

Term	Explanation
Stack-Unit	Lists the stack unit or units that are checked. Entering all
	shows the status for all stacks.
Portpipe	Lists the portpipe (port-set) or port pipes (port-sets) that are
	checked. Entering all shows the status for linecards and
	port-pipes in the chassis.
CAM Partition	Shows the CAM profile of the CAM.
Available CAM	Identifies the amount of CAM space remaining for that
	profile.
Estimated CAM	Estimates the amount of CAM space the listed policy will
per Port	require.
Status	Indicates whether or not the policy will be allowed in the
	CAM.

Dell#test cam-usage service-policy input LauraIn stack-unit all

Stack-UnitPortpipeCAM PartitionAvailableCAMEstimatedCAM per PortStatus

---------------------------------------------------------------

---------	0	IPv4Flow
0
102	0	0Allowed
0		IPv4Flow
102		0Allowed
Dell#
!

Dell#test cam-usage service-policy input LauraIn stack-unit 0 port-set 1

Stack-UnitPortpipeCAM PartitionAvailable CAMEstimatedCAM per PortStatus

---------------------------------------------------------------

-----------

468 Content Addressable Memory (CAM)