Dell 9.7(0.0) manual Vlan forward-delay, Vlan vlan-rangeforward-delay seconds

Related Commands

VersionDescription

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced.

vlan forward-delay — changes the time interval before Dell Networking OS transitions to the Forwarding state.

vlan hello-time — change the time interval between BPDUs.

vlan max-age — changes the time interval before PVST+ refreshes.

show spanning-tree pvst — displays the PVST+ configuration.

vlan forward-delay

Set the amount of time the interface waits in the Listening state and the Learning state before transitioning to the Forwarding state.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

vlan vlan-rangeforward-delay seconds

To return to the default setting, use the no vlan forward-delaycommand.

vlan vlan-rangeEnter the keyword vlan then the VLAN numbers. The range is from 1 to 4094.

forward-delayEnter the keywords forward-delaythen the time interval,

secondsin seconds, that Dell Networking OS waits before transitioning PVST+ to the forwarding state. The range is from 4 to 30 seconds. The default is 15 seconds.

15 seconds

CONFIGURATION (conf-pvst)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Per-VLAN Spanning Tree Plus (PVST+) 1241