Dell 9.7(0.0) manual Ip ospf hello-interval seconds

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.0.2.0	Introduced on the S6000.
8.3.19.0	Introduced on the S4820T.
8.3.11.1	Introduced on the Z9000.
8.3.7.0	Introduced on the S4810.
7.6.1.0	Introduced on the S-Series.
7.5.1.0	Introduced on the C-Series.
pre- 6.1.1.1	Introduced on the E-Series.

Usage	By default, the dead interval is four times the default hello-interval.
Information
Related	ip ospf hello-interval — sets the time interval between the hello packets.
Commands

ip ospf hello-interval

Specify the time interval between the hello packets sent on the interface.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

ip ospf hello-interval seconds

To return to the default value, use the no ip ospf hello-intervalcommand.

seconds	Enter the number of seconds for the interval. The range is
	from 1 to 65535. The default is 10 seconds.
10 seconds
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

Open Shortest Path First (OSPFv2 and OSPFv3) 1085