Related
Commands •show cam pbr – displays the content of the PBR CAM.
•show ip redirect-list – displays the redirect-list configuration.
ip redirect-list
Configure a redirect list and enter REDIRECT-LIST mode.
S6000
Syntax ip redirect-list redirect-list-name
To remove a redirect list, use the no ip redirect-list command.
Parameters redirect-list-
name
Enter the name of a redirect list.
Defaults None
Command
Modes
CONFIGURATION
Command
History Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
8.4.2.1 Introduced on the C-Series and S-Series.
8.4.2.0 Introduced on the E-Series Tera Scale.
7.7.1.0 Introduced on the E-Series ExaScale.
permit
Configure a permit rule. A permit rule excludes the matching packets from PBR classification and routes
them using conventional routing.
S6000
Syntax permit {ip-protocol-number | protocol-type} {source mask | any
| host ip-address} {destination mask | any | host ip-address}
[bit] [operators]
To remove the rule, use one of the following:
1178 Policy-based Routing (PBR)