Dell 9.7(0.0) manual Ntp authenticate

Command Modes

Command History

events	Enter the keyword events to display information on NTP
	events.
loopfilter	Enter the keyword loopfilter to display information on
	NTP local clock frequency.
packets	Enter the keyword packets to display information on NTP
	packets.
select	Enter the keyword select to display information on the NTP
	clock selection.
sync	Enter the keyword sync to display information on the NTP
	clock synchronization.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

ntp authenticate

Enable authentication of NTP traffic between the switch and the NTP time serving hosts.

Syntax	ntp authenticate
	To disable NTP authentication, use the no ntp authentication command.
Defaults	Not enabled.
Command	CONFIGURATION
Modes

System Time and Date 1571