Dell 9.7(0.0) Ipv6 nd ra-guard attach-policy, Ipv6 nd ra-guard enable, Parameters Policy policy

Related Commands

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

•ipv6 nd ra-guardenable—Allows you to configure the RA guard related commands.

•ipv6 nd raguard policy policy-name — Defines the RA guard policy name and enter the RA guard policy configuration mode.

ipv6 nd ra-guard attach-policy

Apply the IPv6 RA guard to a specific interface.

Syntax	ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan
	2, vlan 3.....]]
Parameters	policy policy-	Enter the keyword policy then the policy name. The
	name	policy-name allows a maximum of 140 characters.
	vlan [vlan 1,	Enter the keyword vlan then the VLAN range. The VLAN
	vlan 2, vlan	range is from 1 to 4094.
	3........]

Defaults

Command

Modes

Command

History

none

INTERFACE

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

Related	show ipv6 nd ra-guard policy — Displays the configuration applied on all the RA
Commands	guard policies or a specific RA guard policy.

ipv6 nd ra-guard enable

Allow you to configure the RA guard related commands.

Syntax	ipv6 nd ra-guard enable
	To disable the RA guard, use the no ipv6 nd ra-guard enable command.

Neighbor Discovery Protocol (NDP) 1025