Dell 9.7(0.0) manual Intf-type cr4 autoneg

shutdown — disables/enables the VLAN.

tagged — adds a Layer 2 interface to a VLAN as a tagged interface.

untagged — adds a Layer 2 interface to a VLAN as an untagged interface.

intf-type cr4 autoneg

Set the interface type as CR4 with auto-negotiation enabled.

S6000

Syntax	intf-type cr4 autoneg
	If you configure intf-type cr4 autoneg, use the no intf-type cr4
	autoneg command to set the interface type as cr4 with autonegotiation disabled.

Defaults

Command Modes

Command History

Usage Information

Related Commands

Not configured

CONFIGURATION

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.3.16.1Introduced on the MXL 10/40GbE Switch IO Module.

If you configure interface type as CR4 with auto-negotiation enabled, also configure CR4 with auto-negotiation. Many DAC cable link issues are resolved by setting the interface type as CR4.

•Interfaces — configures a physical interface.

•interface loopback — configures a loopback interface.

•interface null — configures a null interface.

•interface port-channel — configures a port channel group.

Interfaces 687