Defaults

Command Modes

Command History

information. The slot range is from 0 to 1 and the port range is 0.

• For a 10-Gigabit Ethernet interface, enter the keyword

 

TenGigabitEthernet then the slot/port information.

 

• For a 40-Gigabit Ethernet interface, enter the keyword

 

fortyGigE then the slot/port information.

 

• For a tunnel interface, enter the keyword tunnel. The

 

range is from 1 to 16383.

vrrp [[ipv6] vrid]

(OPTIONAL) Enter the keyword vrrp to clear the counters of

 

all VRRP groups. To clear the counters of VRRP groups on all

 

IPv6 interfaces, enter ipv6. To clear the counters of a

 

specified group, enter a VRID number from 1 to 255.

learning-limit

(OPTIONAL) Enter the keywords learning-limitto clear

 

unknown source address (SA) drop counters when MAC

 

learning limit is configured on the interface.

vlan vlan-id

Enter the keyword vlan followed by the interface VLAN

 

number. The range is from 1 to 4094.

Without an interface specified, the command clears all interface counters.

EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.7(0.0)

Added the vlan parameter.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.4.1.0Added support (E-Series only) for VRRP groups in a VRF instance.

8.3.7.0Introduced on the S4810.

8.2.1.0Added support for 4093 VLANs on the E-Series ExaScale. Prior to the release, 2094 was supported.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

Interfaces

665

Page 665
Image 665
Dell 9.7(0.0) manual Vrrp ipv6 vrid, Learning-limit