match ip precedence — identifies the IP precedence values as match criteria.
match ip dscp — configures the match criteria based on the DSCP value.
match mac access-group — configures a match criterion for a class map based on
the contents of the designated MAC ACL.
match mac dot1p — configures a match criterion for a class map based on a dot1p
value.
match mac vlan — configures a match criterion for a class map based on VLAN ID.
service-queue — assigns a class map and QoS policy to different queues.
show qos class-map — views the current class map information.
clear qos statistics
Clear qos statistics clears statistics from show qos statistics.
S6000
Syntax clear qos statistics interface-name
Parameters interface-name Enter one of the following keywords:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Defaults none
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.18.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Quality of Service (QoS) 1257