Dell 9.7(0.0) Show interface management ethernet, Show serial console baud rate, Bootadmin #

Related	default-gateway— Configure the IP address for the default gateway.
Commands
	interface_management_ethernet_ip_address — Assign an IP address to the
	Management Ethernet interface.

show interface management ethernet

Display the IP address configured for the Management interface.

S6000

Syntax

Command Modes

Command History

Example

show interface management ethernet

BOOT_USER

Version 9.0.2.0 Introduced on the S6000.

BOOT_USER # show interfaces management ethernet Management ethernet IP address: 10.16.133.17/24

BOOT_ADMIN #

On the S6000, the output of this command includes the MAC address and port number of the assigned management port.

Example	BOOT_ADMIN # show int man eth
	Management ethernet IP address: 10.16.132.4/16
	BOOT_ADMIN #
Related	interface_management_ethernet_ip_address — Assign an IP address to the
Commands	Management Ethernet interface.
	reload — Configure speed, duplex, and negotiation settings for the management
	interface.

show serial console baud rate

Use the show serial console to show the values of the serial console baud rate.

S6000

Syntax show serial console baudrate

Command BOOT_USER

Modes

Boot Command Line Interface 333