Dell 9.7(0.0) manual Bpdu-destination-mac-address, Debug spanning-tree, Gvrp

VersionDescription

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

bpdu-destination-mac-address

Use the Provider Bridge Group address in Spanning Tree or GVRP PDUs.

Syntaxbpdu-destination-mac-address [stp gvrp] provider-bridge-group

Parameters	Force STP, RSTP, and MSTP to use the Provider Bridge Group
xstp
	address as the destination MAC address in its BPDUs.
gvrp	Forces GVRP to use the Provider Bridge GVRP Address as the
	destination MAC address in its PDUs.

Defaults

Command Modes

Command History

The destination MAC address for BPDUs is the Bridge Group Address.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the S4810.

8.2.1.0Introduced on the C-Series and S-Series.

debug spanning-tree

Enable debugging of the spanning tree protocol and view information on the protocol.

Syntaxdebug spanning-tree {stp-id[all bpdu config events exceptions general root] protocol}

To disable debugging, use the no debug spanning-treecommand.

1552 Spanning Tree Protocol (STP)