Dell 9.7(0.0) manual Dcbx Commands, Advertise dcbx-tlv, Tlv, Pkts

1		13%	ETS
2		13%	ETS
3		13%	ETS
4		12%	ETS
5		12%	ETS
6		12%	ETS
7		12%	ETS
Remote Parameters:
-------------------
Remote is disabled
Local Parameters :
------------------
Local is enabled		Bandwidth	TSA
TC-grp Priority#
0	0,1,2,3,4,5,6,7	100%	ETS
1		0%	ETS
2		0%	ETS
3		0%	ETS
4		0%	ETS
5		0%	ETS
6		0%	ETS
7		0%	ETS
Priority#		Bandwidth	TSA
0		13%	ETS
1		13%	ETS
2		13%	ETS
3		13%	ETS
4		12%	ETS
5		12%	ETS
6		12%	ETS
7		12%	ETS
Oper status is init
Conf TLV Tx Status is disabled
Traffic Class TLV Tx Status is disabled
0	Input Conf TLV Pkts, 0 Output Conf TLV Pkts, 0 Error Conf
TLV Pkts			Output Traffic Class TLV
0	Input Traffic Class TLV Pkts, 0
Pkts, 0 Error Traffic Class
TLV
Pkts

DCBX Commands

The following DCBX commands are supported on the Dell Networking OS.

advertise dcbx-tlv

On a DCBX port with a manual role, configure the PFC and ETS TLVs advertised to DCBX peers.

Syntaxadvertise dcbx-tlv {ets-conf ets-reco pfc} [ets-conf ets- reco pfc] [ets-conf ets-reco pfc]

To remove the advertised ETS TLVs, use the no advertise dcbx-tlvcommand.

Data Center Bridging (DCB) 491