Dell 9.7(0.0) manual Show ip bgp next-hop, Capabilities advertised to neighbor for IPv4 Unicast

Capabilities advertised to neighbor for IPv4 Unicast :

MULTIPROTO_EXT(1)

ROUTE_REFRESH(2)

ADD_PATH(69)

CISCO_ROUTE_REFRESH(128)

For address family: IPv4 Unicast

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0

InQ : Added 0, Replaced 0, Withdrawn 0

OutQ : Added 0, Withdrawn 0

Allow local AS number 0 times in AS-PATH attribute

Prefixes accepted 2, withdrawn 15 by peer, martian prefixes ignored 0

	Prefixes advertised 0, denied 0, withdrawn 0 from peer
	Connections established 1; dropped 0
	Last reset never
	Local host: 172.16.0.1, Local port: 58145
	Foreign host: 172.16.0.2, Foreign port: 179
	Dell#
Related	show ip bgp — views the current BGP routing table.
Commands

show ip bgp next-hop

View all next hops (using learned routes only) with current reachability and flap status. This command only displays one path, even if the next hop is reachable by multiple paths.

S6000

Syntax	show ip bgp [vrf vrf-name] next-hop
Parameters	vrf vrf-name	Enter the keyword vrf followed by the name of the VRF to

view all next hops corresponding to that VRF.

Command Modes

Command History

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

Border Gateway Protocol 441