Dell 9.7(0.0) manual Logging buffered level size, Critical , errors , warnings , notifications

Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux (PMUX) mode only.

Usage Information

Related Commands

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Added udp and tcp keywords for the S4810, S4820T,
	S6000, Z9000, and MXL.
9.4.(0.0)	Added support for VRF.
9.2(1.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

9.2(0.0)

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.4.1.0Added support for IPv6.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

Multiple logging servers of both IPv4 and/or IPv6 can be configured.

logging on — enables the logging asynchronously to logging buffer, console, Syslog server, and terminal lines.

logging trap — enables logging to the Syslog server based on severity.

logging buffered

Enable logging and specify which messages are logged to an internal buffer. By default, all messages are logged to the internal buffer.

Syntax	logging buffered [level] [size]
	To return to the default values, use the default logging buffered command.
	To disable logging stored to an internal buffer, use the no logging buffered
	command.

Parameters	(OPTIONAL) Indicate a value from 0 to 7 or enter one of the
level
	following equivalent words: emergencies, alerts,
	critical, errors, warnings, notifications,

1506 Simple Network Management Protocol (SNMP) and Syslog