Dell 9.7(0.0) manual Dei mark green yellow 0

Command History

Usage Information

Related Commands

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.3.1.0Introduced on the C-Series and S-Series.

You must first enable DEI for this configuration to take effect.

dei enable — Make packets eligible for dropping based on their DEI value.

dei mark

Set the DEI value on egress according to the color currently assigned to the packet.

S6000

Syntax	dei mark {green yellow} {0 1}
Parameters	0 1	Enter the bit value you want to map to a color.
	green red	Choose a color:
	yellow	• Green: High priority packets that are the least preferred
		to be dropped.
		• Yellow: Lower priority packets that are treated as best-
		effort.
Defaults	All the packets on egress are marked with DEI 0.
Command	INTERFACE
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VLAN Stacking 1597