Dell 9.7(0.0) manual Output-range, Vlan vlan-id

Added support for output range parameter for S4810 and Z9000.

Defaults

Command Modes

Command History

Example (Unicast)

Example (Multicast)

Related Commands

output-range	For a multicast MAC address, enter the keyword output-
interface	range then one of the following interfaces to indicate a
	range of ports for which traffic is forwarded:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a port channel interface, enter the keywords port-
	channel then a number.
vlan vlan-id	Enter the keyword vlan then a VLAN ID number from 1 to
	4094.
Not configured.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.1(0.0)

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.2.1.1 Introduced on the E-Series.

mac-address-table static 00:01:00:00:00:01 {output Te 1/2 vlan 2}

mac-address-table static 01:00:5E:01:00:01 {multicast vlan

2output—range Te 1/2,Te 1/3}

show mac-address-table — displays the MAC address table.

920 Layer 2