Dell 9.7(0.0) Match ip dscp, Syntaxmatch ip ipv6 ip-any dscp dscp-listset-ip-dscp value, Ip-any

Related	class-map — identifies the class map.
Commands

match ip dscp

Use a differentiated services code point (DSCP) value as a match criteria.

S6000

Syntaxmatch {ip ipv6 ip-any} dscp dscp-list[set-ip-dscp value]

Parameters

Defaults

Command Modes

Command History

To remove a DSCP value as a match criteria, use the no match {ip ipv6 ip-any} dscp dscp-list[[multicast] set-ip-dscpvalue] command.

ip	Enter the keyword ip to support IPv4 traffic.
ipv6	Enter the keyword ipv6 to support IPv6 traffic.
ip-any	Enter the keyword ip-anyto support IPv4 and IPv6 traffic.
dscp-list	Enter the IP DSCP values that is to be the match criteria.
	Separate values by commas — no spaces ( 1,2,3 ) or indicate
	a list of values separated by a hyphen (1-3). The range is from
	0 to 63.
set-ip-dscp	(OPTIONAL) Enter the keywords set-ip-dscpthen the IP
value	DSCP value. The matched traffic is marked with the DSCP
	value. The range is from 0 to 63.

none

CLASS-MAP CONFIGURATION (config-class-map)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Added the ipv6 and ip-any options on the Z9000, S6000,
	S4820T, S4810, MXL.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

1260 Quality of Service (QoS)